{"name":"Bread Modular 3D printed Eurorack case","config":{"layout":"single","front":"honeycomb","back":"solid","cable":false},"summary":{"layout":"Single","description":"One 42 HP skiff. Two side panels, two rails, a bottom plate and two slide-in covers.","cases":1,"hp":42,"partsToPrint":7,"totalBytes":1480204},"parts":[{"quantity":1,"name":"Side panel, left","file":"side-panel-left.stl","url":"https://www.breadmodular.com/case/stl/side-panel-left.stl","bytes":177084},{"quantity":1,"name":"Side panel, right","file":"side-panel-right.stl","url":"https://www.breadmodular.com/case/stl/side-panel-right.stl","bytes":163484},{"quantity":2,"name":"Rail","file":"rail.stl","url":"https://www.breadmodular.com/case/stl/rail.stl","bytes":577984,"note":"Front and back rail are the same part"},{"quantity":1,"name":"Bottom plate","file":"bottom-plate.stl","url":"https://www.breadmodular.com/case/stl/bottom-plate.stl","bytes":415884},{"quantity":1,"name":"Cover, honeycomb","file":"cover-honeycomb.stl","url":"https://www.breadmodular.com/case/stl/cover-honeycomb.stl","bytes":144284},{"quantity":1,"name":"Cover, solid","file":"cover-solid.stl","url":"https://www.breadmodular.com/case/stl/cover-solid.stl","bytes":1484}],"hardware":[{"quantity":8,"item":"M3 x 10 mm female hex spacer (standoff), 5.5 mm across flats","use":"4 in the rail ends, 4 in the bottom sockets. Add two more for every module you mount."},{"quantity":8,"item":"M3 x 8 mm socket head screw","use":"4 for the rail ends, 4 for the bottom plates. Add two more for every module you mount."},{"item":"Superglue","use":"Holds the spacers in their sockets."}],"assembly":[{"step":1,"title":"Print the parts","text":"Print the 7 parts from the print list. Every STL file is already turned the way it should lie on the print bed, so keep that orientation and do not scale the parts. They all fit a 256 x 256 mm bed.","notes":["Side panels print with the outer face down.","The 3D preview lays the parts out on 256 x 256 mm beds to show what there is to print. Your slicer may arrange them differently."],"needs":["1 x Side panel, left","1 x Side panel, right","2 x Rail","1 x Bottom plate","1 x Cover, honeycomb","1 x Cover, solid"]},{"step":2,"title":"Order the M3 spacers and screws","text":"The printed parts are held together by M3 spacers and screws, and they are all standard sizes. Order them while the parts print.","notes":["8 x M3 hex spacer (standoff): 10 mm long, female thread at both ends, 5.5 mm across the flats. Brass ones work well. The printed sockets are made for 5.5 mm, so check the width before you buy.","8 x M3 x 8 mm socket head screw: 4 for the rail ends, 4 for the bottom plate. The whole case uses this one screw size.","For every module you mount: two more spacers and two more M3 x 8 mm screws. Count your modules and add them to the order.","Socket head screws are also sold as hex socket cap screws (ISO 4762 or DIN 912). An M3 one has a head 5.5 mm wide and 3 mm high, which is what the printed recesses are made for.","Superglue for the spacers, and a 2.5 mm hex key for all the screws."],"needs":["8 x M3 x 10 mm female hex spacer (standoff), 5.5 mm across flats","8 x M3 x 8 mm socket head screw","Superglue","2.5 mm hex key"]},{"step":3,"title":"Glue in the M3 hex spacers","text":"The case is held together by M3 x 10 mm female hex spacers (standoffs) that sit in printed hex sockets. Put a small drop of superglue in a socket, push the spacer in until it sits just below the surface, and let it cure. Keep the glue out of the thread.","notes":["Rail ends: 4 spacers, one in every rail end that meets an outer side panel.","Bottom sockets: 4 spacers, two in the bottom edge of every side panel.","Rail tops: one spacer for every module screw, two per module. Each rail has 21 sockets, one every 2 HP. Only fill the ones you need."],"needs":["8 x M3 x 10 mm female hex spacer (standoff), 5.5 mm across flats","Superglue"]},{"step":4,"title":"Screw the rails to the side panels","text":"Slide the rail ends into the notches in the top corners of the side panels, from the front and from the back. The hex sockets face up. Front and back rail are the same part. Fix every rail end with an M3 x 8 mm screw through the side panel wall, into the spacer in the rail end.","needs":["2 x Rail","4 x M3 x 8 mm socket head screw","2.5 mm hex key"]},{"step":5,"title":"Slide in the covers","text":"Turn the frame upside down. Slide a cover into the front and the back groove from the open bottom, until its top edge sits in the groove under the rail.","needs":["1 x Cover, honeycomb","1 x Cover, solid"]},{"step":6,"title":"Screw on the bottom plate","text":"With the frame still upside down, set the bottom plate on. The side panels drop into its sockets and the cover edges into its grooves. Fix it with four M3 x 8 mm screws from underneath, into the spacers in the side panels.","notes":["The four holes in the middle of the plate are for the bus board that powers the modules."],"needs":["1 x Bottom plate","4 x M3 x 8 mm socket head screw","2.5 mm hex key"]},{"step":7,"title":"Mount the modules","text":"Turn the case upright. The first module of a row sits next to the 1 HP lip of the left side panel. Fix every module with two M3 x 8 mm screws into the spacers in the rails. The sockets are on a 2 HP grid.","needs":["2 x M3 x 8 mm socket head screw per module","2 x M3 x 10 mm hex spacer per module"]}],"configurator":"https://www.breadmodular.com/case?layout=single&front=honeycomb&back=solid","options":{"layout":[{"id":"single","name":"Single","cases":1,"hp":42,"topBraces":0,"cable":false},{"id":"double","name":"Double","cases":2,"hp":84,"topBraces":1,"cable":false},{"id":"angled","name":"Two tier","cases":2,"hp":84,"topBraces":0,"cable":true},{"id":"double-tier","name":"Double two tier","cases":4,"hp":168,"topBraces":2,"cable":true},{"id":"quad","name":"Quad","cases":4,"hp":168,"topBraces":2,"cable":false},{"id":"studio","name":"Studio","cases":6,"hp":252,"topBraces":3,"cable":true}],"front":["solid","grill","honeycomb","diamonds","louvres","perforated"],"back":["solid","grill","honeycomb","diamonds","louvres","perforated"],"cable":["1"]}}